Simple Plumbing Tips That Work Well And Everyone Can Understand

Lifestyle

 

The thought of fixing a plumbing problem can seem daunting if you do not know much about plumbing. You often have to wait for a plumber to make a house call, and you may end up paying a lot for a repair you could have made on your own. Continue on for information to help simply your plumbing problems!

Avoid plumbing problems! Do not stop up the toilet! Some common items that will stop up a toilet include: toys, hair, paper towels, birth control items, and feminine personal products. Do not flush these items down your toilet – unless the instructions say otherwise! These can stop up your toilet – to the point that nothing else will work – except calling a plumber!

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

If your pipes are prone to freezing, let the water trickle continuously in at least one faucet during weather that is below freezing. This will minimize the chances that the pipes will freeze and leave you without water. If water is continually running through the pipes and trickling out of a faucet, the pipes are less likely to freeze.

Unclog drains with ease. Try using a plunger and drain cleaner, as your clog may simply be a build-up of hair and debris. If this doesn’t work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently, which will help to loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times, before the clog is cleared so don’t give up!

Making sure you know all of your problems so you can have them fixed by one plumber visit is very beneficial. Having them all fixed in one visit takes a lot of money off of your bill because you don’t have to pay for the visit multiple times so make sure you make a list first.

Use filters on all drains to prevent debris that might clog the pipes from getting through. Whenever large particles become trapped in the strainer, remove them. You should also clean your bathtub strainer any time it is slow to drain.

Make sure that you disconnect all hoses outside your house when the fall season hits. This is important to reduce the chance of freezing, which can cause damage to the connecting pipes. Disconnect all of your water hoses and store them safely to put your family in the best position for the fall.

Sometimes you have to make the choice between replacing or repairing. If you have an old appliance, that uses a lot of water or electricity, it may be best to replace. Sure, it will cost more initially, but it will save you money in the long run. The other thing is, you can’t be sure how well a repair will work out, whereas with a new appliance you’ll at least get a guarantee.

If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don’t let the different requirements throw you off.

Have your pipes in your plumbing system frozen? You can skip the cost of hiring a plumber by using this method. First, open the faucet so steam produced by the thawing process can escape. Begin thawing close to the faucet, and move down the line as each section thaws out. Use a hair dryer or a heat lamp to warm along the pipe. Even though this method consumes quite a bit of time, it is safer than most other heating methods. Furthermore, it requires no cleanup.

Do a routine check around your house each month on each and every faucet to make sure there are no signs of leaks or drips. Over time, leaks can add a lot of money to your water bill and will worsen if you do not take care of the problem.

If you own property where the temperature gets below freezing for an extended amount of time each year, you should make sure that pipes located in unheated areas, such as crawl spaces and garages, are insulated. Pipes that are exposed to the outside elements or those that are prone to freezing, should be protected by heat tape or thermostat-controlled heat cables to prevent them from freezing.

Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.

As you can see, plumbing problems don’t have to be so difficult. If you can solve the problem yourself, you can save time waiting for a plumber, as well as saving a whole lot of money. Try applying what you’ve learned from this article next time you have a plumbing problem!

Issues With Plumbing? Try These Simple Solution!

Ready to make plumbing work for you? Great, time to get started! Wait, how do you do that and how do you get started? Never fear, here are some plumbing tips! This collection of advice should provide you with just the right amount of knowledge and inspiration to do your own plumbing.

Ensure that everyone in your household knows how to turn off the main water supply, or knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.

If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to contact a water softener company, and get them to come out and assess your water. They will be able to fix the problem by adding a water softener.

Keep grease, fat and oil out of your kitchen drain. When they cool down, they get hard and that will cause clogs in your sink drains. Grease is of particular concern when there is a disposal unit installed in your drain. It can cause the unit to lose efficiency. The best thing to do is to dispose of oil-based liquids away from your sinks.

Use baking soda and one cup of vinegar per month to keep the bathtub drain clear and running well. This will cause the vigorous bubbling you may remember from the “volcano” in a grade school science project, so be sure to close the drain with a stopper. After waiting a few minutes, flush the drain with boiling water. This should help clear your pipes of accumulated hair and soap scum.

Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.

Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.

You can remove unsightly mineral buildup from your shower head by soaking it in vinegar overnight. This loosens the deposits, and in the morning you only need to wipe off the residue with a rag. If your shower head is high up an not removable, place vinegar in a plastic bag, slip the bag over the shower head and hold in place with a twist tie.

Before the cold season hits, check out the condition of your gutters on the roof of your house. Remove all debris, leaves and branches so that you can have a smooth flow of water and easy drainage. Caretaking in advance will help to prevent serious issues with plumbing down the road.

If the hot water heater in your house is over ten years old, you should look at replacing it. Hot water heaters are very susceptible to corrosion on the bottom. This can lead to leaking and flooding whatever room it is in. Then not only will you have to replace it, but you’ll have to fix any damage caused by the leak.

During the warm seasons, you will see that there will be many bird nests forming in and around your plumbing vent pipes. It is essential to clear these out, as they can have a devastating effect on the quality of your plumbing and the flow of water in your home.

Check your faucets outdoors for drips before the first winter freeze. If there are problems, you must make the needed fixes prior to the arrival of freezing temperatures. Regardless of the material of your particular pipes, whether it be copper, steel or plastic, water pressure from freezing water will cause pipes to crack. Cracked pipes can lead to extensive water damage to your home, resulting in very costly repairs.

Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.

Keep an eye on your monthly water bill to catch plumbing problems. Has your water bill gone up recently, even though nothing’s changed? This could indicate a water leak or appliance problem somewhere inside or outside of your home. Check under sinks for rusted pipes, look for water puddles under outside faucets, and consider having a plumber come out to listen to your pipes to detect running water.

To prevent the most common kitchen sink clogs, avoid putting any sort of solid foods down your drain. Many foods, such as eggs and vegetable and fruit waste actually harden with exposure to cold water and over time can form clogs that are next to impossible to remove without professional help.

Now is the perfect chance to make plumbing work for you! Don’t worry; it can be personally tailored for just your home. After reading these previous tips, you should have seen that techniques and equipment are numerous and that anyone can can apply them to their plumbing jobs. It just takes research and experimentation.